|
|
  
 
Subject:
C-4 Rear Bearing Hub Question
From: Don B. <donbarwone(at)comcast.net make the one numeric>
Subject: C-4 Rear Bearing Hub Question
Date: Sun, 03 Oct 2004 20:18:48 -0500
Lines: 7
NNTP-Posting-Host: 24.0.159.167
________________________________________________
Hi,
Has anybody replaced the rear hub on a C-4? How long did it take?
Any gotchyas? Special tools, What size is the Spindle Nut?
Thanks,
Don B.
From: Jon Smith <jonsmith(at)yahoo.com>
Subject: Re: C-4 Rear Bearing Hub Question
Lines: 16
Date: Sun, 03 Oct 2004 19:41:05 -0700
NNTP-Posting-Host: 68.227.1.218
________________________________________________
The nut is metric and you need a special socket. When you buy the
bearing you should ask for the socket. That is when I bought mine and I
do not remember the size. Be careful that you do not dameage the abs
harness...
Don B. wrote:
> Hi,
>
> Has anybody replaced the rear hub on a C-4? How long did it take?
> Any gotchyas? Special tools, What size is the Spindle Nut?
>
> Thanks,
> Don B.
>
From: "Steve Raft" <sraft(at)cybernex.net>
Subject: Re: C-4 Rear Bearing Hub Question
Date: Mon, 4 Oct 2004 23:12:04 -0400
Lines: 22
NNTP-Posting-Host: 216.107.56.80
________________________________________________
On my `94 the nut is 36mm. You`ll also need a torx 55 for the 3 bolts that
hold the bearing/hub onto the knuckle. The higher you can get the car the
better - on jack stands, getting enough leverage to break the torx bolts is
difficult. I didn`t remove the half shaft or any of the suspension links.
If you remove some of these components it gives more access to the bolts.
Don`t forget to properly torque up the spindle nut when you`re done.
Steve Raft
`94 Blk/Blk 6spd Z07 coupe
"Don B." <donbarwone(at)comcast.net make the one numeric> wrote in message
news:9r81m0ld6r464tv92vc65f1p6pkpj6sjkb(at)4ax.com...
> Hi,
>
> Has anybody replaced the rear hub on a C-4? How long did it take?
> Any gotchyas? Special tools, What size is the Spindle Nut?
>
> Thanks,
> Don B.
NEXT POSTS:
| | |
