|
|
  
 
Subject:
Re: C-4 Power Window Switch
From: "Ray Quayle" <ray_quayle(at)btopenworld.com>
Subject: Re: C-4 Power Window Switch
Date: Sat, 19 Jul 2003 21:30:23 +0000 (UTC)
Lines: 20
NNTP-Posting-Host: host213-122-141-2.in-addr.btopenworld.com
________________________________________________
Larry,
Shouldn`t be a problem to find. Same switch as the power door lock switch.
If you have any problem, let me know. I have a cubic buttload of them.
--
Ray Quayle in England
`86 Indy PaceCar, 4+3
NCM Founder #2896
NCM Lifetime #672
Graduate of Gordon`s School
"L C" <a454Vette(at)webtv.net> wrote in message
news:28499-3F199A7C-66(at)storefull-2171.public.lawson.webtv.net...
> On my `88 Conv. I`ve owned since new I replaced the passenger side
> switch in Oct. `90. Just this afternoon the same side switch went out
> again. My car has only 35,000mi. Are these switches JUNK!!! Or just dumb
> luck???? Not to bad to replace...but some what of a pain!!! Is the part
> still easy to obtain? Thanks! Larry
>
From: Don B. <donbarwone(at)comcast.net make the one numeric>
Subject: C-4 Rear Bearing Hub Question
Date: Sun, 03 Oct 2004 20:18:48 -0500
Lines: 7
NNTP-Posting-Host: 24.0.159.167
________________________________________________
Hi,
Has anybody replaced the rear hub on a C-4? How long did it take?
Any gotchyas? Special tools, What size is the Spindle Nut?
Thanks,
Don B.
From: Jon Smith <jonsmith(at)yahoo.com>
Subject: Re: C-4 Rear Bearing Hub Question
Lines: 16
Date: Sun, 03 Oct 2004 19:41:05 -0700
NNTP-Posting-Host: 68.227.1.218
________________________________________________
The nut is metric and you need a special socket. When you buy the
bearing you should ask for the socket. That is when I bought mine and I
do not remember the size. Be careful that you do not dameage the abs
harness...
Don B. wrote:
> Hi,
>
> Has anybody replaced the rear hub on a C-4? How long did it take?
> Any gotchyas? Special tools, What size is the Spindle Nut?
>
> Thanks,
> Don B.
>
NEXT POSTS:
| | |
