|
|
  
 
Subject:
Re: c-4 AC Bolower ? / Please Help
From: Greg <not(at)home.now>
Subject: Re: c-4 AC Bolower ? / Please Help
Lines: 16
Date: Fri, 10 Jun 2005 16:46:26 GMT
NNTP-Posting-Host: 209.86.139.252
________________________________________________
everyone is steering you in the right direction, pull a vacuum on the
system, i you have a leak you can test each pod or use a smoke machine
( used mostly for EVAP problems) to figure out where your leak is.
Greg
On Sat, 04 Jun 2005 12:36:00 GMT, "`Key" <Key(at)Ya.Net> wrote:
>thanks in advance for any help. my mechanic seems to be
>stumped.
>have an 84 vette with ac blowing problems.
>the ac is blowing cold but the air only comes out the middle
>vents.
>It does not blow out the vents on the ends.
>any advice ?
>
>thanks
From: "`Key" <Key(at)Ya.Net>
Subject: Re: c-4 AC Bolower ? / Please Help
Lines: 38
Date: Fri, 10 Jun 2005 17:03:07 GMT
NNTP-Posting-Host: 24.242.99.172
________________________________________________
"Greg" <not(at)home.now> wrote in message
news:nggja1574uvimfvn1ft7p9obei3ksoc76o(at)4ax.com...
> everyone is steering you in the right direction, pull a
> vacuum on the
> system, I you have a leak you can test each pod or use a
> smoke machine
> ( used mostly for EVAP problems) to figure out where your
> leak is.
> Greg
My mechanic said that the blowing can be switched from the
center vents to blow out the defrost vents.
He thinks that if the vacuum was bad it would only blow out
one of the vents and couldn`t be switched to blow out
another.
Any thoughts on his line of thinking?
Could he be correct or is he thinking wrong?
--
"Key"
> On Sat, 04 Jun 2005 12:36:00 GMT, "`Key" <Key(at)Ya.Net>
> wrote:
>
>>thanks in advance for any help. my mechanic seems to be
>>stumped.
>>have an 84 vette with ac blowing problems.
>>the ac is blowing cold but the air only comes out the
>>middle
>>vents.
>>It does not blow out the vents on the ends.
>>any advice ?
>>
>>thanks
>
From: Greg <not(at)home.now>
Subject: Re: c-4 AC Bolower ? / Please Help
Lines: 27
Date: Fri, 10 Jun 2005 18:28:47 GMT
NNTP-Posting-Host: 209.86.129.245
________________________________________________
the vacum SORCE is ok, but there are FOUR vacum pods, more than likely
one of the two mode doors. have him look at the vacum diagram. you may
be right, he may just not want to work on your car. if he does not
find some one else!!!! he needs to test each vacum pod at the line
leading to the pod and then if he finds the bad one find out if it is
the pod or the line. Greg (Greg`s Garage)
On Fri, 10 Jun 2005 17:03:07 GMT, "`Key" <Key(at)Ya.Net> wrote:
>"Greg" <not(at)home.now> wrote in message
>news:nggja1574uvimfvn1ft7p9obei3ksoc76o(at)4ax.com...
>> everyone is steering you in the right direction, pull a
>> vacuum on the
>> system, I you have a leak you can test each pod or use a
>> smoke machine
>> ( used mostly for EVAP problems) to figure out where your
>> leak is.
>> Greg
>
>My mechanic said that the blowing can be switched from the
>center vents to blow out the defrost vents.
>He thinks that if the vacuum was bad it would only blow out
>one of the vents and couldn`t be switched to blow out
>another.
>
>Any thoughts on his line of thinking?
>Could he be correct or is he thinking wrong?
NEXT POSTS:
| | |
